Skip to main content

Paper plane folding and shooting robot

COOL, I always wanted to have this, so I can send flyers all around.

Here is a full description by the creator:

Station 1, paper magazine
The level of the paper is automatically adjusted so that the paper at the top always go straight into the machine. I do this with a lego accelerometer sensor that is mounted on a arm the rests on the top of the paper pile, so as the machines runs and the paper pile gets smaller and the angel of the arm changes. The accelerometer sensors tilt function then tells the motor to raise the magazine. And when i fill the machine with paper the motor will lower the magazine.

Station 2, Tip fold
Using a color sensor the check when the paper is in the correct spot and then the machine holds the paper in 3 spot with pneumatic cylinders. It hold the paper right at the edge of the folds so that the paper doesn't move. Because i have to hold the paper at the tip as well and not be in the way of the fold i get a gap of 2-3mm at the tip that doesn't get folded. So the tip is not perfect.

Station 3, Wing fold
The wings fold automatically by the forward motion. How its done is hard to see in the clip of V2 and the picture above but you can see it in the V1 clip at 1:01.

Station 4, Middle fold
This station is the one I'm most proud of.
The motors that drive the wheels is inside the two moving parts (1 motor for each side). The folding is done with a XL motor that drives 4 linear units. As the fold is happening there is 1 arm at each side that hold the paper to make sure that the paper don't starts to fold in the wrong direction and right before the fold is done the arms get pulled away with small pneumatic cylinder. Also here i use color sensors to tell when the paper is ready.

Station 5, Throwing
When the plane been moved into this station and is ready to shot the 2 XL motors start the throwing wheels and then the driving wheels(the ones that transport the paper) get pulled away with pneumatic cylinders right before a pneumatic cylinder pulls the throwing wheels together.

Compressor ( the unit next to the two nxt controllers.)
I use a motor that drives 2 small pumps.
To check the pressure i use a pneumatic cylinder that press on some springs. The pneumatic linear motion i then convert to a rotation movement. and then on a wheel i have taped on a paper"shading scale"(dark in one end and gets lighter unit its completely white). Then i have a light sensor that looks at it and i get a analog reading of the pressure. (so this is the only part thats not lego, a small printed black/white piece of paper. + tape)

Servo relay ( the unit next to the compressor)
For some reason the drive motors for station 4 didn't like to be controlled by IR receivers (could be cable length or that the motors was too stress so that current got to high) So i had to use a battery box directly to the motors, and then used a servo motor to control the battery box.

Pneumatic valves
All the pneumatic valves is controlled by servo motors.

Material:
2x NXT
5x NXT Servo motors
4x NXT Color sensors
3x NXT Touch sensors
1x Touch sensor multiplexer
1x NXT accelerometer sensor
1x NXT Infrared Link sensor
5x Normal Power function motors
5x XL Power function motors
4x IR receivers
5x Battery boxes
about 7149 lego pieces


For the 3d drawing i used SR3D builder. (did the drawing after the machine was complete)

NXTLog with some pictures and explanation
WOW and if the machine it self wasn't cool enough, he also made a complete 3D drawing now that is ultra cool !!!

Popular posts from this blog

MINDSTORMS Retires!

2023 is the 25th Anniversary of the MINDSTORMS brand. For 25 years, MINDSTORMS has educated and inspired a generation of robot builders, both children and adults. Unfortunately, the LEGO Group decided to end the line on December 2022. Many ROBOTMAK3RS have been passionately involved with the development of MINDSTORMS through the MUP and MCP programs. Even with the newest Robot Inventor line, several ROBOTMAK3RS were invited to submit additional bonus models that were included in the official app. Regardless of the retirement of a major LEGO robotics product line, ROBOTMAK3RS continue to MAKE-SHARE-INSPIRE using all LEGO robotics platforms available to us. Here is the official statement from LEGO. Since its launch in September 1998, LEGO MINDSTORMS has been one of the core ‘Build & Code’ experiences in the company’s portfolio, carrying with it significant brand equity and becoming a stand-out experience for the early days of consumer robotics and leading to current Build & Code

Celebrating MINDSTORMS with a Remix Part 1

In honor of the 25th Anniversary of MINDSTORMS, we asked ROBOTMAK3RS to combine a LEGO set of their choice with a MINDSTORMS set. Here is what these five ROBOTMAK3RS came up with.  MINDSTORMS Chess Assistant by Arvind Seshan Overview: When you are new to chess, it can be a challenge to remember which pieces go where. Now, you can use machine learning and LEGO MINDSTORMS Robot Inventor to build a tool to help you learn where all the chess pieces go on the chess board. Sets used: LEGO® Iconic Chess Set (40174) and MINDSTORMS Robot Inventor (51515) Review: I really like how the chess set base can store all the pieces underneath and that the board neatly splits in half for handy storage. The chess pieces themselves are very sturdy and well built. My only criticism is the building of the box itself. It was quite difficult to see what pieces to use and since the entire box is made mostly of thin plates, it took a lot of time and patience. I would have liked the storage area to be sliding dra

Celebrating 25 Years of MINDSTORMS

In celebration of the 25th Anniversary of MINDSTORMS, we take a trip through history. Please also visit ROBOTMAK3RS Community every week as we highlight different projects all through 2023 in celebration of the anniversary. Some of the early history is based on the content shared by  Coder Shah  in our  MINDSTORMS EV3 Community Group . Some of the text and links may have been edited from his original posts for consistency and clarity.  1984 - Kjeld Kirk Kristiansen watched a TV program called "Talking Turtle," where MIT professor Seymour Papert demonstrated how children could control robot "turtles" using LOGO, a programming language he developed. 1988 - The collaboration between MIT and LEGO resulted in LEGO TC Logo in 1988, which allowed students to control LEGO models using computer commands. The video shows Papert demonstrating TC Logo. 1990 - LEGO TC Logo was hampered since the robots you built had to be tethered to a personal computer. LEGO and MIT