Skip to content

travisgoodspeed/loraham

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

73 Commits
 
 
 
 
 
 
 
 

Repository files navigation

LoRaHam

This project consists of ham radio protocols and Arduino examples for LoRa on 70cm. The code, the protocols, and the hardware have all been intentionally kept simple for easy experimentation, in the interest of getting folks to build things and to put their projects on the air.

This project has only recently been made public; please join us in #loraham on Freenode if you'd like to play along.

Getting Started

You will need to buy Adafruit M0 LoRa Feather boards, which can be programmed to act as Beacons, Gateways, and Terminals. You should be running the latest Arduino environment, with the Adafruit board definitions and the RadioHead radio library.

http://www.airspayce.com/mikem/arduino/RadioHead/

Basics of the Protocol

A Beacon is just a transmitter, and nothing else. It doesn't receive packets, but once every five or more minutes, it will transmit a quick burst with a voltage, a sequence number, and maybe another sensor reading. A beacon's packet is addressed to the callsign "BEACON" from its own callsign, which is followed by a suffix. Comments can come later. For example, this is my solar powered beacon that won't transmit on low voltage.

BEACON KK4VCZ-16 VCC=3.718945 count=437 Solar. No TX on low voltage.

These messages are then repeated by Gateways, which you might also call a Digipeater. Gateways are optionally connected to the Internet, in order to share their packets with the wider world. When a gateway transmits a packet, it appends a second line addressed to RT (retransmit) from its own callsign and optional observations of the received signal strength. In this example, KK4VCZ-16 is the Beacon and KM4BBD-10 is the Gateway.

BEACON KK4VCZ-16 VCC=3.718945 count=437 Solar. No TX on low voltage.
RT KM4BBD-10 rssi=-46

Finally, you might want to use a LoRaHam network for your own personal messages on an interactive Terminal. In this case, you will send the initial packet in the form of DESTINATION SOURCE Text. So when KK4VCZ sends a message to KC3BVL, it'll look like this.

KC3BVL KK4VCZ Hey Jim, it's Travis.  Care for a beer?

The packet might be retransmitted by a gateway or two, so when Jim (KC3BVL) receives the packet, it might look like the following if repeated by KM4BBD-10 and AB3XL-13. Note that the first line is unchanged, and also that you can graph the path that the packet took by looking at the later lines.

KC3BVL KK4VCZ Hey Jim, it's Travis.  Care for a beer?
RT KM4BBD-10 rssi=-46
RT AB3XL-13 rssi=-80

The extra lines are added in order, so the packet went from KK4VCZ to KM4BBD-10 to AB3XL-13 to KC3BVL. Just like on the first line, the destination is always listed first and the source listed second.

Hardware Designs

See the Wiki at https://github.com/travisgoodspeed/loraham/wiki for our hardware reference designs. In brief, we are simply powering Adafruit LoRa Feather 434MHz boards with solar-charging motion activated light boxes from which the lights have been torn out.

Active Networks

The first LoRaHam network was born and raised in West Philadelphia, on the airwaves it passes packets each day. Other networks are planned; please say Howdy in the IRC channel if you'd like to start one.

About

Ham radio protocols and Arduino examples for LoRa on 70cm.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •